Amiga

F2R16 - Flash based ROM Replacement for Amiga Computers

F2R16The Amiga, like many other computers of the late 80s, uses 16-bit wide mask ROMs to store the machine firmware. Unfortunately, the pinout of these ROMs is incompatible with the JEDEC defined EPROM pinout. Memory manufacturers produced "ROM compatible" EPROMS like the 27C400 to allow development and quick turn manufacturing. These EPROMS are however becoming quite hard to find and still require a UV lamp to erase the chips. F2R16 brings all the benefits of modern flash memory technology to any platform designed to use these obsolete devices.

Filed under: 

GTERM25 - DB25 Active SCSI Terminator with diagnostics LEDs

GTERMActive termination is required to get newer higher performance drives working on vintage computers. Unfortunately both the Amiga and older Apple computers use a DB25 SCSI connector which makes finding a suitable terminator quite difficult. GTERM25 solves this problem providing a high performance active terminator with a DB25 connector and SCSI diagnostic LEDs.

GTERM25-A00 - DB25 Active SCSI Terminator with diagnostics LEDs

A new version of this project is available here

GTERMActive termination is required to get newer higher performance drives working on vintage computers. Unfortunately both the Amiga and older Apple computers use a DB25 SCSI connector which makes finding a suitable terminator quite difficult. GTERM25 solves this problem providing a high performance active terminator with a DB25 connector and SCSI diagnostic LEDs.

A520HD - Commodore Amiga RGB to HDTV Component Adapter

A520HDThe GGLABS A520HD is the HDTV equivalent of the classic Commodore A520 TV modulator. Instead of encoding the Amiga video signal to a low quality composite output it converts the RGB output to a high quality YPbPr signal compatible with HDTVs with a component input. The A520HD connects to the Amiga 23-pin video port and is powered directly from the system.

Filed under: