Put the kit together. Cannot get it to load the OS (from HD) or anything else.
Red bar goes all the way and nothing happens. My old 1Meg card works fine.
Using GS - ROM01.
I sent you a email to help you.
In general if a kit board has issues I would try:
1- visually inspect all solder joints for issues
2- reseat the SIMM and the ICs.
3- run a memory tester. I recommend megamemorytest.
4- try to jumper the card to 4MB for debug.
Kit debugging steps
I sent you a email to help you.
In general if a kit board has issues I would try:
1- visually inspect all solder joints for issues
2- reseat the SIMM and the ICs.
3- run a memory tester. I recommend megamemorytest.
4- try to jumper the card to 4MB for debug.