GLINK

Your description of the GLINK-LT says jumpers J3 and J4 can be used to configure for 9600 baud but I can find nothing saying how they are to be configured.

I am using the GLINK-LT in the user port of my SX-64. It is connected via a standard telbbs cable (7 wires) to my PC running BBS Server. Communication between the GLINK-LT and BBS Server remains at 2400 baud whether the J3 and J4 jumpers are on or removed. If I set BBS Server for 9600 baud, the log reports "RS232 error. Framing error! (Check baud rate)".

Hi

How did you guys connect this to a modern OS ?

I have a serial to usb lead and then...

I've tried virtual modem software , serial port software and various versions of them.

I can communicate with the 64 via zterm but no internet / bbs access.

I'll end up with a pi or arduino solution at this rate .
Mike