GLINKUSB-LT-C01 - User Port RS232 to USB for Commodore 8-bit Computers

Project Status: 
retired

glinkusbGLINKUSB-LT is a modern variation of the Commodore VIC-1011. Instead of providing a legacy 12V RS232 connection, it provides a USB Virtual Com Port (VCP) suitable for direct connection to any modern PC. The adapter is fully supported by the standard Commodore BASIC at up to 2400 baud. Jumpers allow the card to be configured as a UP9600 for 9600 baud operation in Novaterm and Striketerm. A reset button is also provided for added convenience.

This is a bug fix version of the previous GLINKUSB-LT-C00. The ubiquitous FTDI FT230X chip is used as a RS232 to USB bridge. The FT230X is programmed to detect VBUS and to drive a TX and RX LED. Jumper blocks J3, J4 and J5 enable UP9600 functionality.

glink232glink232

Jumper Configuration

Jumper VIC-1011 UP9600
J3 - 1-2
J4 - 1-2
J5 - 1-2
Design Files
Filed under: