GLINK-LT is a modern clone of the Commodore VIC-1011A RS232 User Port adapter for Commodore 8-bit computers. The adapter is fully supported by the standard Commodore BASIC at up to 2400 baud. Jumpers allow the card to be configured as a UP9600 for 9600 baud operation in Novaterm and Striketerm. A reset button is also provided for added convenience.
The big brother of our previously released expansion card. The RAMGS-MAX will expand the memory of the apple IIgs to the maximum allowed of 8MB.
High power LEDs require a constant current power supply for optimal operation. GLED1 is designed to drive 10W white LEDs (9 diodes in series) from a 12V or 24V supply. The board can be used down to 3V but the maximum output power will be reduced in this case. The design supports discrete level dimming using a two or three way switch or continuous control using a PWM signal. The design is based on the ON Semiconductor NCP3065/3066.
The apple IIgs is the most advanced computer in the Apple II series. Equipped with a 65c816 8/16-bit CPU with 24-bit address space it could address up to 16MB of memory. The original rom 01 model shipped with 256KB of fast RAM, the revised rom 3 shipped with 1MB (both had an additional 128KB of standard RAM and 64KB of sound RAM). RAMGS is a newly designed 4MB expansion card for this great classic computer.
ProtoJS is small (5x5cm) board with a minimal S08JS implementation and a standard 100mil prototyping area. While similar in features to our microJS, protoJS is more suited to permanently wire simple one off USB projects.
Many MCU applications use electro-mechanical relays to control AC loads. While this is an excellent solution for occasionally turning on/off a load it is not suited for frequent switching or PWM applications. SSR01 is an opto-coupled solid state relay that can control two AC loads up to 16A each.
USTK01 is a small USB device that allows the connection of thermocouples (using MAX6675 or MAX 31855), humidity sensors (DHT11/DHT22) or any I2C or RS232 device (5V or 3.3V).