Active termination is required to get newer higher performance drives working on vintage computers. Unfortunately both the Amiga and older Apple computers use a DB25 SCSI connector which makes finding a suitable terminator quite difficult. GTERM25 solves this problem providing a high performance active terminator with a DB25 connector and SCSI diagnostic LEDs.
The Minipro TL866 is very popular among hobbyist because of its low price and ease of use. Its list of supported chips is however somewhat limited compared to more expensive professional programmers. The E2R16 adapter adds support for the ROM pinout compatible EPROM of the 27C400 series which are compatible with Amiga computers and many arcade machines.
Active termination is required to get newer higher performance drives working on vintage computers. Unfortunately both the Amiga and older Apple computers use a DB25 SCSI connector which makes finding a suitable terminator quite difficult. GTERM25 solves this problem providing a high performance active terminator with a DB25 connector and SCSI diagnostic LEDs.
The GGLABS A521HD is a high performance RGB to YPbPr converter to directly connect an HDTV with component inputs to the A2000/A3000/A4000. The A521HD plugs into the video slot of the big box Amiga.
RS232 monitors are quite common but most of them use the standard good old DB25 connectors. The majority of the RS232 ports in use today however use the smaller DB9 connector. This forces the use chains of adapters to get the commercial monitor/breakout boards working. The GGLABS T232 solves the problem by providing native DB9 connections.
The GGLABS A520HD is the HDTV equivalent of the classic Commodore A520 TV modulator. Instead of encoding the Amiga video signal to a low quality composite output it converts the RGB output to a high quality YPbPr signal compatible with HDTVs with a component input. The A520HD connects to the Amiga 23-pin video port and is powered directly from the system.