The Minipro TL866 is very popular among hobbyist because of its low price and ease of use. Its list of supported chips is however somewhat limited compared to more expensive professional programmers. The E2R16 adapter adds support for the ROM pinout compatible EPROM of the 27C400 series which are compatible with Amiga computers and many arcade machines.

The GGLABS A521HD is a high performance RGB to YPbPr converter to directly connect an HDTV with component inputs to the A2000/A3000/A4000. The A521HD plugs into the video slot of the big box Amiga.

The GGLABS A520HD is the HDTV equivalent of the classic Commodore A520 TV modulator. Instead of encoding the Amiga video signal to a low quality composite output it converts the RGB output to a high quality YPbPr signal compatible with HDTVs with a component input. The A520HD connects to the Amiga 23-pin video port and is powered directly from the system.

Both the commodore 64 and the 128 have a software UART implementation that limits the useful speed to 2400 bauds. To work around this limitation Dr. Evil Labs and later CMD produced the SwiftLink232 and Turbo232 cartridges based on the 6551 ACIA chip. Both of these have been out of production for a very long time. GLINK232 is a modern replacement for the swiftlink232 allowing the commodore 64/128 to communicate at speeds up to 38400 bauds.

High power LEDs require a constant current power supply for optimal operation. GLED1 is designed to drive 10W white LEDs (9 diodes in series) from a 12V or 24V supply. The board can be used down to 3V but the maximum output power will be reduced in this case. The design supports discrete level dimming using a two or three way switch or continuous control using a PWM signal. The design is based on the ON Semiconductor NCP3065/3066.

ProtoJS is small (5x5cm) board with a minimal S08JS implementation and a standard 100mil prototyping area. While similar in features to our microJS, protoJS is more suited to permanently wire simple one off USB projects.

Many MCU applications use electro-mechanical relays to control AC loads. While this is an excellent solution for occasionally turning on/off a load it is not suited for frequent switching or PWM applications. SSR01 is an opto-coupled solid state relay that can control two AC loads up to 16A each.