released

The Amiga, like many other computers of the late 80s, uses 16-bit wide mask ROMs to store the machine firmware. Unfortunately, the pinout of these ROMs is incompatible with the JEDEC defined EPROM pinout. Memory manufacturers produced "ROM compatible" EPROMS like the 27C400 to allow development and quick turn manufacturing. These EPROMS are however becoming quite hard to find and still require a UV lamp to erase the chips. F2R16 brings all the benefits of modern flash memory technology to any platform designed to use these obsolete devices.

RS232 monitors are quite common but most of them use the standard good old DB25 connectors. The majority of the RS232 ports in use today however use the smaller DB9 connector. This forces the use chains of adapters to get the commercial monitor/breakout boards working. The GGLABS T232 solves the problem by providing native DB9 connections.

This cartridge was originally developed to speed up the manufacturing diagnostic of our GRAM and GLINK232 products. Having to load the diagnostic for every board is pretty tedious and time consuming. The UNICART/D allows to have a custom ROM for both C64 and C128 while allowing to still plug in an additional cartridge.

Both the commodore 64 and the 128 have a software UART implementation that limits the useful speed to 2400 bauds. To work around this limitation Dr. Evil Labs and later CMD produced the SwiftLink232 and Turbo232 cartridges based on the 6551 ACIA chip. Both of these have been out of production for a very long time. GLINK232T is a modern replacement for the CMD Turbo232 allowing the commodore 64/128 to communicate at speeds up to 230400 bauds.

The apple IIgs is the most advanced computer in the Apple II series. Equipped with a 65c816 8/16-bit CPU with 24-bit address space it could address up to 16MB of memory. The original rom 01 model shipped with 256KB of fast RAM, the revised rom 3 shipped with 1MB (both had an additional 128KB of standard RAM and 64KB of sound RAM). RAMGS is a newly designed 8MB expansion card for this great classic computer.

GLINK-LT is a modern clone of the Commodore VIC-1011A RS232 User Port adapter for Commodore 8-bit computers. The adapter is fully supported by the standard Commodore BASIC at up to 2400 baud. Jumpers allow the card to be configured as a UP9600 for 9600 baud operation in Novaterm and Striketerm. A reset button and a 5V header are also provided for added convenience.

The geoRAM is a 512KB memory expansion for the Commodore 64 and 128 designed by Berkeley Softworks for use with GEOS. While not as fast as the Commodore REU due to its lack of DMA capabilities, it still provides a significant performance boost. GRAM/1D is a 1MB geoRAM compatible cartridge based on a two 1Mx4 DRAM devices.

GLINKUSB-LT is a modern variation of the Commodore VIC-1011. Instead of providing a legacy 12V RS232 connection, it provides a USB Virtual Com Port (VCP) suitable for direct connection to any modern PC. The adapter is fully supported by the standard Commodore BASIC at up to 2400 baud. Jumpers allow the card to be configured as a UP9600 for 9600 baud operation in Novaterm and Striketerm. A reset button is also provided for added convenience.