A new version of this project is available here
The Amiga, like many other computers of the late 80s, uses 16-bit wide mask ROMs to store the machine firmware. Unfortunately, the pinout of these ROMs is incompatible with the JEDEC defined EPROM pinout. Memory manufacturers produced "ROM compatible" EPROMS like the 27C400 to allow development and quick turn manufacturing. These EPROMS are however becoming quite hard to find and still require a UV lamp to erase the chips. F2R16 brings all the benefits of modern flash memory technology to any platform designed to use these obsolete devices.
The design is pretty straight forward. It uses a 2-8Mbit TSOP-I flash device of the 29Fxxx series and adapts it to the 27Cxxx pinout. WE# and RST# which do not exist in the 27Cxxx pinout are wired to a header to allow programming on a TL866 using the F2R16-PROG adapter.
When using a 29F800 flash ROM, A18 can be used to select the active 512KB bank (useful for dual kickstart configurations)
Programming the F2R16
The adapter requires a programmer that can support the 29Fxxx series of flash devices. A simple adapter can be hand wired for programmers with a 48-pin socket.
When using the popular TL866 programmer, it must be equipped with both the TSOP-48 adapter and the F2R16-PROG adapter. A jumper wire is also required to connect WE#, RST# between the adapter and the F2R16. The A18 signal must also be connected when using 29F800 devices.