retired

Project has been retired because a newer and improved version of the design has been released.

GZ/80-A02 - Zilog Z80 turbo card for Apple II computers

Submitted by GG on Sun, 06/16/2019 - 22:47

A new version of this project is available here

gz80The Microsoft Softcard was the first card to allow CP/M software to run on the Apple II. It was originally developed to simplify the porting of Microsoft Basic to the Apple II. It turned out to be a great success and at some point in time it was the most popular CP/M platform in use.

Filed under

A2SCSI-A00 - Apple II SCSI card clone

Submitted by GG on Wed, 05/22/2019 - 22:12

A new version of this project is available here

A2SCSI FrontThe Apple II SCSI card from 1986 was one of the first interface cards to attach a Hard Disk Drive to the Apple II line of computers. A2SCSI is a clone of the last revision (rev.C) of the card with a few enhancements to improve compatibility with modern SCSI drives.

Filed under

GZ/80-A00 - Zilog Z80 card for Apple II computers

Submitted by GG on Sat, 01/19/2019 - 14:15

A new version of this project is available here

ramgsThe Microsoft Softcard was the first card to allow CP/M software to run on the Apple II. It was originally developed to simplify the porting of Microsoft Basic to the Apple II. It turned out to be a great success and at some point in time it was the most popular CP/M platform in use.

Filed under

GRAM/4D-D02 - 4MB geoRAM Compatible RAM Expansion for Commodore 64/128

Submitted by GG on Sun, 09/02/2018 - 10:41

A new version of this project is available here

geoRAMThe geoRAM is a 512KB memory expansion for the Commodore 64 and 128 designed by Berkeley Softworks for use with GEOS. While not as fast as the Commodore REU due to its lack of DMA capabilities, it still provides a significant performance boost. GRAM/4D is a 4MB geoRAM compatible cartridge based on a two 4Mx4 DRAM devices.

Filed under

GRAM/4D-D01 - 4MB geoRAM Compatible RAM Expansion for Commodore 64/128

Submitted by GG on Sun, 05/06/2018 - 17:12

A new version of this project is available here

geoRAMThe geoRAM is a 512KB memory expansion for the Commodore 64 and 128 designed by Berkeley Softworks for use with GEOS. While not as fast as the Commodore REU due to its lack of DMA capabilities, it still provides a significant performance boost. GRAM/4D is a 4MB geoRAM compatible cartridge based on a two 4Mx4 DRAM devices.

Filed under

GLINK-LT-B00 - User Port RS232 for Commodore 8-bit Computers

Submitted by GG on Tue, 03/20/2018 - 00:00

A new version of this project is available here

glinkltGLINK-LT is a modern clone of the Commodore VIC-1011A RS232 User Port adapter for Commodore 8-bit computers. The adapter is fully supported by the standard Commodore BASIC at up to 2400 baud. Jumpers allow the card to be configured as a UP9600 for 9600 baud operation in Novaterm and Striketerm. A reset button and a 5V header are also provided for added convenience.

Filed under

GRAM/1D-C00 - 1MB geoRAM clone for Commodore 64/128

Submitted by GG on Thu, 11/30/2017 - 15:54

A new version of this project is available here

geoRAMThe geoRAM is a 512KB memory expansion for the Commodore 64 and 128 designed by Berkeley Softworks for use with GEOS. While not as fast as the Commodore REU due to its lack of DMA capabilities, it still provides a significant performance boost. GRAM/1D is a 1MB geoRAM compatible cartridge based on a two 1Mx4 DRAM devices.

Filed under

E2R16v2 - 27C400/800/160 programming adaptor for Minipro TL866

Submitted by GG on Wed, 11/15/2017 - 01:53

A new version of this project is available here

E2R16 V2The Minipro TL866 is very popular among hobbyist because of its low price and ease of use. Its list of supported chips is however somewhat limited compared to more expensive professional programmers. The E2R16v2 adapter adds support for the ROM pinout compatible EPROM of the 27C400/800/160 and C322 series.

Filed under